Carbide bur, round cone, blue, Staleks Expert 6/14 mm

Carbide burr, round cone, blue, Staleks Expert 6/14 mm

Blue cut with medium grit, indicates medium straight and cross cutting (the hardness of the bit is indicated by the number and depth of the blades). Corn shape for correcting artificial nails, removing gel polish and hard coatings.

It is important to observe the recommended speed, as excessive speed may injure the client.

In manicure:

• Correction of artificial nails.
• Preparing artificial nails for extension.
• Correction of the nail plate.
• Carefully trims the material and leaves a smooth surface.
• During work, it removes material in the form of fine chips rather than dust.

In pedicure/podiatry:

• Working on calloused areas of skin.
• Treatment of calluses and corns.

Features:

• High-quality diamond coating.
• Suitable for all types of sterilization and disinfection.
• Corrosion resistant.

Characteristics:

• Diameter: 6 mm
• Working part: 14 mm

Instructions for use:

1. Install the nail drill bit according to the device instructions.
2. Use it to remove artificial coatings from the nail plate, shape and correct artificial nails, remove excess material, prepare natural nails for reapplication of the coating, and polish rough skin around the nail plate.
3. Then remove the cutter from the device.

Warnings:

• Store in a dry, ventilated place, out of the reach of children, at least 1 m away from heating devices, at a temperature not lower than +0°C and not higher than +40°C, and relative humidity up to 80%.
• Use as intended, keep clean and dry after use.
• Do not use acids or alkalis for disinfection and sterilization.
• Do not use abrasive or metal objects for cleaning.
• Do not allow to fall onto hard surfaces and avoid contact with corrosive contaminants.
• Resistant to all types of disinfection and sterilization without loss of quality.