Carbide burr, rounded cylinder, blue, Staleks Expert 5/13 mm

Carbide end mill, rounded cylinder, blue, Staleks Expert 5/13 mm

Blue cut with medium grit, indicates medium straight and cross cutting (the hardness of the cutter is indicated by the number and depth of the blades). "Cone" shape for correcting artificial nails, removing gel polish and hard coatings.

It is important to follow the recommended speed, as excessive speed can injure the client.

In manicure:

• Removal of artificial material (gel).
• Removing part of the nail plate.

In pedicure/podiatry:

• Treatment of hyperkeratosis of the feet.
• Treatment of corns and calluses.

Features:

• High-quality diamond coating.
• Suitable for all types of sterilization and disinfection.
• Corrosion resistant.

Characteristics:

• Diameter: 5 mm
• Working part: 13 mm

Instructions for use:

1. Install the nail drill bit according to the device instructions.
2. Use it to remove artificial coatings from the nail plate, shape and correct artificial nails, remove excess material, prepare natural nails for reapplication of the coating, and polish rough skin around the nail plate.
3. Then remove the cutter from the device.

Warnings:

• Store in a dry, ventilated place, out of the reach of children, at least 1 m away from heating devices, at a temperature not lower than +0°C and not higher than +40°C, and at a relative humidity of up to 80%.
• Use as intended, keep clean and dry after use.
• Do not use acids or alkalis for disinfection and sterilization.
• Do not use abrasive or metal objects for cleaning.
• Do not allow to fall onto hard surfaces and avoid contact with corrosive contaminants.
• Resistant to all types of disinfection and sterilization without loss of quality.