Carbide cone bur, blue, Staleks Expert 6/14 mm

Carbide bur, blue cone, Staleks Expert 6/14 mm

Blue cut with medium grit, means medium hard standard cross cut (the hardness of the cutter depends on the number and depth of the blades). "Cone" shape for correcting artificial nails, removing artificial material, treating the skin of the feet and finger pads.

In manicure:

• Correction of thin artificial material.
• Removing deposits.
• Treatment of side roll exfoliation.
• In pedicure/podiatry:
• Treatment of corns and calluses.

Features:

• High-quality diamond coating.
• Suitable for all types of sterilization and disinfection.
• Corrosion resistant.

Characteristics:

• Diameter: 6 mm
• Working part: 14 mm

Instructions for use:

1. Install the nail drill bit according to the device instructions.
2. Use it to remove artificial coatings from the nail plate, shape and correct artificial nails, remove excess material, prepare natural nails for reapplication of the coating, and polish rough skin around the nail plate.
3. Then remove the cutter from the device.

Warnings:

• Store in a dry, ventilated place, out of the reach of children, at least 1 m away from heating devices, at a temperature not lower than +0°C and not higher than +40°C, and at a relative humidity of up to 80%.
• Use as intended, keep clean and dry after use.
• Do not use acids or alkalis for disinfection and sterilization.
• Do not use abrasive or metal objects for cleaning.
• Do not allow to fall onto hard surfaces and avoid contact with corrosive contaminants.
• Resistant to all types of disinfection and sterilization without loss of quality.