Medizio Medipro Touch CMDV5 + HMD04 Podiatry Drill, 40,000 RPM

Medizio Medipro Touch CMDV5 + HMD04 Podiatry Drill, 40,000 RPM

The Saeshin MEDIPRO TOUCH is an advanced podiatry drill featuring a brushless BLDC motor, a built-in dust extraction system, and a fully touchscreen display. The device reaches speeds of up to 40,000 rpm and a maximum torque of 5.0 N·cm, providing performance suitable for intensive, professional use.

The model is equipped with a backlit HMD04 handle, AUTO and MANUAL modes, manual or foot controls, and a settings-saving function. The integrated dust collector sucks up dust generated during milling and directs it into a replaceable bag.

A router and dust collector in one unit

The dust extraction system is integrated into the HMD04 handle. Dust generated during operation is captured near the work surface and directed into a bag mounted on the control unit.
This solution helps limit the spread of dust and keeps the workstation cleaner without the need for a separate tabletop dust collector.

Key advantages of MEDIPRO TOUCH

• brushless BLDC motor,
• maximum speed: 40,000 rpm,
• maximum torque: 5.0 N·cm,
• integrated dust extraction system,
• backlit HMD04 handle,
• fully touchscreen display,
• function for saving and recalling settings,
• rotational speed control,
• suction power adjustment,
• AUTO and MANUAL operating modes,
• manual or foot pedal control,
• forward and reverse rotation – FWD/REV,
• independent activation of the motor and dust collector,
• panel sound volume control,
• standard cutter shank diameter: 2.35 mm,
• handle for easy transport of the device.

The touchscreen panel allows you to control the device’s most important functions:

• selection of motor speed settings,
• suction power adjustment,
• rotation direction (FWD/REV),
• HAND/FOOT mode (manual or foot-operated),
• AUTO or MANUAL mode,
• turning the motor on and off,
• turning the suction head on and off,
• handle lighting,
• panel signal volume,
• and settings memory.

After selecting the appropriate parameter on the screen, its value is adjusted using the knob located on the control unit.

Settings Memory Function

The memory function allows you to save selected parameters and recall them later. It lets you quickly return to frequently used speed and suction power settings.

This feature is particularly useful when performing repetitive procedures or working with a specific type of bur.

HMD04 Backlit Handle

The HMD04 handpiece is equipped with a work area light that can be turned on and off via the touch panel.

The handpiece reaches a maximum speed of 40,000 rpm and is compatible with standard burs featuring a 2.35 mm shank.
AUTO and MANUAL Modes

Saeshin MEDIPRO TOUCH offers two control modes:

• AUTO – rotational speed and suction power are adjusted simultaneously;
• MANUAL – rotational speed and suction intensity can be set independently.

AUTO mode allows you to quickly adjust the suction level to the current speed of the milling machine. MANUAL mode provides independent control over each parameter.

Manual and Foot Controls

In HAND mode, the handle motor is activated using a button located on the machine’s control panel.

In FOOT mode, the router is controlled using a foot pedal. The motor runs as long as the pedal is pressed; releasing the pedal stops the rotation.

Independent control of the motor and dust extraction system

The handle motor and the dust extraction system have separate ON/OFF buttons. This allows you to use the dust extraction only when needed and to adjust its intensity independently.

Forward and reverse rotation

The FWD/REV function allows you to select:

• FWD – forward rotation,
• REV – reverse rotation.

The rotation direction should only be changed after the motor has come to a complete stop.

Depending on the bit used and the qualifications of the person performing the procedure, the device can be used for:

• professional pedicures,
• performing podiatric procedures,
• trimming and shaping nails,
• conditioning the natural nail plate,
• conditioning cuticles and the nail fold,
• removing hybrid, gel, and acrylic nail treatments,
• smoothing the treated surfaces,
• procedures that generate a large amount of dust.

Replaceable dust bag

Dust sucked up by the handle is collected in the replaceable bag. Do not operate the device without the bag properly installed.

The bag should be checked and replaced regularly. Each time the bag is replaced, the manufacturer recommends removing the dust accumulated inside the handle in accordance with the user manual.

Technical Specifications

• Model MEDIPRO TOUCH
• Control Unit Model CMDV5
• Handpiece Model HMD04
• Motor Type Brushless BLDC
• Maximum speed 40,000 rpm
• Maximum torque 5.0 N·cm
• Dust collection function Yes
• Control panel fully touchscreen
• Handle lighting yes
• Settings memory yes
• Speed control yes
• Suction power adjustment yes
• Operating modes AUTO/MANUAL
• Rotation direction clockwise/counterclockwise – FWD/REV
• Control manual or foot-operated
• Cutter shank diameter 2.35 mm
• Input voltage AC 100–120 V / 220–240 V
• Frequency 50/60 Hz
• Power consumption 85 W
• Fuse 5 A / 2 A
• Pedal protection rating IPX1

Kit components

• CMDV5 control unit,
• HMD04 backlit handle with suction system,
• ON/OFF foot pedal,
• power cord,
• dust bag,
• handle holder,
• tweezers,
• user manual.

Why choose the Saeshin MEDIPRO TOUCH?

The Saeshin MEDIPRO TOUCH combines a powerful podiatry drill, a dust collector, and a modern touchscreen panel into a single professional device.

With a speed of up to 40,000 rpm, 5.0 N·cm of torque, a BLDC motor, a backlit handle, a settings memory, and AUTO and MANUAL modes, you can precisely adjust the parameters to suit the procedure being performed.

The product is covered by a 12-month warranty, effective from the date of purchase.

Please call us before placing your order to confirm availability:

514-009-087

Processing time: 3–5 business days