Medizio Saeshin B350 – 120II Podiatry Drill, White, 30,000 RPM

Medizio Saeshin B350 – 120II White Podiatry Drill, 30,000 RPM

The Saeshin Brillian B350 is a professional drill designed for manicures, pedicures, and cosmetic and podiatric treatments. When configured with the 120II handpiece, the device reaches speeds of up to 30,000 rpm and a maximum torque of 3.0 N·cm.

The B350 model offers stepless speed control, clockwise and counterclockwise rotation, and the option of manual control or control via an optional foot pedal. The standard collet chuck allows for the use of popular bits with a 2.35 mm shank diameter.

Smooth Speed Control

The rotational speed is adjusted using a large knob located on the front panel of the control unit. Turning the knob clockwise increases the speed, while turning it counterclockwise decreases it.

This feature allows you to adjust the operating parameters to suit the type of procedure being performed, the surface being treated, and the bur being used.

An LED indicator located below the knob indicates that the power is on.

Key advantages of the Saeshin B350 milling machine

• maximum speed up to 30,000 rpm,
• maximum torque: 3.0 N·cm,
• smooth speed adjustment via the knob,
• forward and reverse rotation – FWD/REV,
• manual or foot pedal control,
• handle with a brush motor,
• standard cutter shank diameter: 2.35 mm,
• collet-type chuck,
• motor overload protection,
• LED power indicator,
• eight built-in bit storage slots,
• handles on both sides of the housing,
• compatible with the H350, H300, or S120II handle,
• compact control unit without a digital display.

The Saeshin B350 control unit is compatible with three handpiece models:

• H350 – maximum speed of 35,000 rpm and torque of 3.0 N·cm,
• H300 – maximum speed of 30,000 rpm and torque of 3.0 N·cm
• S120II – maximum speed of 30,000 rpm and torque of 3.0 N·cm.

All handles feature a brush motor, a collet-type chuck, and are designed for cutters with a shank diameter of 2.35 mm.

The maximum speed of the entire set depends on the handpiece used. Please verify the exact model of the handpiece included in the set before purchasing.

Manual and Foot Control

In manual mode, the handpiece speed is adjusted using a knob located on the control unit.

Once the optional foot pedal is connected, foot control is activated automatically. Pressing the pedal starts the handpiece, while releasing it stops the rotation.

Foot control allows you to operate the milling machine without taking your hands off the procedure you’re performing.

The direction switch allows you to select:

• FWD – forward rotation,
• REV – reverse rotation.

The ability to change the rotation direction increases comfort for both right- and left-handed users. The direction should only be changed after the handpiece has come to a complete stop.

Overload Protection

The Saeshin B350 features a system that protects the motor and handle from excessive load. In the event of an overload, the handle will automatically slow down or stop.

To resume operation, turn off the device and let it cool down for about 5 minutes. This protection helps reduce the risk of damage to the drive.

Depending on the bit used and the skill level of the person performing the treatment, the device can be used for:

• performing manicures and pedicures,
• preparing the natural nail plate,
• trimming and shaping nails,
• removing hybrid, gel, and acrylic nail styles,
• treating cuticles and the nail fold,
• smoothing the treated surfaces,
• performing professional cosmetic and podiatric treatments.

Technical Specifications:

• Control unit model B350
• Digital display No
• Maximum speed with the H350 handpiece 35,000 rpm
• Maximum speed with the S120II handpiece 30,000 rpm
• Maximum speed with H300 handle 30,000 rpm
• Maximum torque 3.0 N·cm
• Speed control stepless
• Rotation direction clockwise/counterclockwise – FWD/REV
• Control manual or foot-operated
• Handle motor type brushed motor
• Chuck type collet
• Cutter shank diameter 2.35 mm
• Input voltage AC 100/110/220/240 V, 50/60 Hz – depending on the version
• Overload protection: Yes
• Power indicator LED
• Number of cutter slots 8
• Control unit protection class Class II

The basic set may include:

• Saeshin B350 control unit,
• H350, H300, or S120II handle—depending on the selected model,
• power cord,
• handle mount,
• user manual.

Optional accessories:

• ON/OFF foot switch,
• additional handle stand.

Please check the exact handle model and the contents of the set before purchasing.

Why choose the Saeshin B350?

The Saeshin B350 combines professional performance with simple and convenient controls. With a speed of up to 35,000 rpm, 3.0 N·cm of torque, smooth speed control, and the ability to operate in both directions, the device can be adapted to a variety of procedures.

Compatibility with standard 2.35 mm burs, foot pedal control, and overload protection make this drill ideal for daily use in beauty salons, podiatry offices, or nail salons.

The product is covered by a 12-month warranty, effective from the date of invoice issuance.

Please call us before placing your order to confirm availability:

514-009-087

Processing time: 3–5 business days