Staleks Expert 6/14 mm Blue Tapered Carbide Cutter

Staleks Expert 6/14 mm Blue Tapered Carbide Cutter

The blue marking indicates medium grit, suitable for medium straight and cross-cutting (the number and depth of the cutting edges indicate the bit’s hardness). The “cone” shape is designed for correcting artificial nails, removing gel polish, and hard coatings.

It is important to follow the recommended speed; excessive speed can injure the client.

In manicure:

• Correcting thin artificial material.
• Removing buildup.
• Treatment of exfoliation on the side ridges.

In pedicure/podiatry:

• Treatment of corns and calluses.

Features:

• High-quality diamond coating.
• Suitable for all types of sterilization and disinfection.
• Corrosion-resistant.

Specifications:

• Diameter: 6 mm
• Working length: 14 mm

Instructions for use:

1. Install the nail drill bit according to the device’s instructions.
2. Use it to remove artificial nail coatings from the nail plate, shape and correct artificial nails, remove excess material, prepare natural nails for reapplication of coatings, and polish rough skin around the nail plate.
3. Then remove the bit from the device.

Warnings:

• Store in a dry, well-ventilated place, out of reach of children, at least 1 m away from heating devices, at a temperature not lower than +0°C and not higher than +40°C, and at a relative humidity of up to 80%.
• Use as intended; keep clean and dry after use.
• Do not use acids or bases for disinfection or sterilization.
• Do not use abrasive or metal objects for cleaning.
• Do not drop onto a hard surface and avoid contact with corrosive contaminants.
• Resistant to all types of disinfection and sterilization without loss of quality.